The antenna with a magnetic base can be firmly attached to any iron, cobalt, nickel metal products. Such as windows, tables and metal supports.
NOTE: BEFORE YOU BUY find channels that works in your area:
www.fcc.gov/reports-research/maps/dtv-maps/ is run by the Consumer Electronics Association and the National Association of Broadcasters.The interface hasn’t changed in over a decade, but it’s simple and the information is useful.
www.antennaweb.org/ is more complex but gives a lot more detail including gorgeous plots of theoretical signal strength and where the broadcast towers are located.
READ THESE FIRST
(1) Your TV must be a digital TV to use this digital antenna. If it is an analog TV, you will need a digital converter box for your TV.
(2) You MUST rescan your TV channels any time a new antenna is attached. Your previously saved channels are synced to your previous antenna. You must resync the new antenna with the TV by rescanning the channels. Simply connect the new antenna without rescanning the TV channels won't work! It is also highly recommended you rescan the TV channels after repositioning your antenna.
(3) Please make sure that you can receive the signal of TV channel before pasting it on the wall or window.
(4) Areas with large areas of obstacles, such as valleys and mountains, will reduce the effective range.
(5) Keep TV antennas away from power-hungry equipment, such as air conditioners, elevators, hair dryers and microwave ovens.
(6) Please visit the relevant website for a list of available free digital channels in your area.
【Free HD Channels】Never pay expensive cable or satellite fees again. With our digital TV antenna, you can receive FULL HD&4K channels including NBC, ABC, PBC, CBS, CW, FOX, CNN USA News, sitcoms, kids and sports programs, with no cost or contracts.
【16.4FT Long Coaxial Cable】 HDTV antenna with new improved 16.4FT coaxial cable can reduce more 80% signal attenuation and pick up clearer TV Channel. The long cable gives it flexibility to place the antenna behind a TV, on a table, or near the window or wall.
【Easy to Install】 Place it in an optimal position, usually window or on a wall. NOTE: The indoor TV antennas for older TV must be connected with TV set-up box.
Polarization : Linear
Voltage : 5V
VSWR : ≤1.5
Impedance : 75 Ω
Extra Signal Booster : With (the 36DBI one)
Color : Black
Cable : 16.4ft
Connectors : F head, with IEC adapter
Specification:
Working Frequency : VHF (170-240Mhz) / UHF( 470-860Mhz)
Signal Enhancement : 36DBI
Reception Range : 5600 miles (36DBI)
Package included:
1 x TV Antenna
Note
1.Placing the antenna higher or close to/in a window may result in better reception. You must rescan whenever you move the antenna.
2.lf you use a flat HDTV,please go through your TV manual to make sure your TV comes with buit-in tuner for freeview.
3.TV reception capacity on the distance among your home,transmitting tower and surrounding environments.
4. The antenna can pass 2~3-storey wall, if the tower over it, maybe the antenna signal have some interfere with it,
5.The antenna can support 1080P, 720P and 4K, ASTC , and so on, but that is not all of tv set and living place can get it, because, many many United States customers living in countryside or Suburb, they don’t know how to use it, and put the antenna very nearly in Magnetic products, that is also interfere with signal, we should write the antenna list far away from Magnetic products and put the antenna in the window, and facing the outside place,
6. The antenna must use the new TV set, if the customers still use the old model tv set, that is can’t get any TV channels. We need use TV BOX and can use it, if use the new TV set, the set including TV box transfer model, or must use it, the antenna use analog signal, and need transfer digital signal.
How to Use
Step 1: connect the end(f-male) of an attached coaxial cable to the ANT/IN connector on the back of the TV or DVB-T tuner.
Step 2: In the TV’s setup menu, set the tuner mode to “Antenna” or “Air”. for more detailed instructions, please refer to your TV manual.
Step 3: In the Tv’s setup menu, set TV to “scan” for channels. this can sometimes be listed as auto-program, auto-scan, channel search or channel scan. consult the TV manual for detailed instructions.
Step 4: if the reception is sporadic, try moving the antenna to another location and rescanning the TV until the optimal position is found.
Step 5: fix the antenna at the optimal position you found.
